1/2″ Multicolor Incandescent Rope Lights

The 1/2″ Multicolor Incandescent Rope Lights with adhesive connections are easy to assemble, allowing anyone to create a professional display. Cut marks are placed every 36 inches for easy customization; these rope lights cannot be cut shorter than 36 inches, and all lengths must be multiples of 36 inches.

Details

• Incandescent
• Red, green, blue, yellow
• Will heat up under operation
• Customize by cutting only at predefined cut marks

The connections in the rope are “floating” and can be cut only at cut marks located every 36 inches. Note that there is a limit to how tightly you can wind the rope around poles and columns. If a section of rope light should fail, splice connectors are included with each spool to allow you to replace that section.

Each spool of rope light comes with an installed power cord. If you are installing a full 150-foot length of rope light, everything will be ready to go. In addition to the built-in plug, each spool contains the following accessories:

• 3 additional power cords with built-in power connectors
• 3 splice connector tubes
• 6 pin connectors for the splice connector tubes
• 3 tubes super glue
• 3 power pin connectors